Sungrow AC007E-01
- Type1-fase AC-lader
- Dimensions205 x 310 x 92 mm
- Weight4,2 kg
- IP ratingIP65
- Warranty5 jaar (Sungrow standaard)
Overview
The Sungrow AC007E-01 is the advanced version of the Sungrow AC charger: single-phase 230 V with up to 7.4 kW (32 A), a fixed 7 m Type 2 charging cable and 6 mA DC residual current detection. It communicates over RS485 with the Sungrow SH3.0-6.0RS single-phase hybrid inverter, so it charges in iSolarCloud with Eco, Fast, Scheduled and Customised modes, including on PV surplus. Charging starts with the RFID card or the iSolarCloud app; OCPP 1.6J is supported.
Read the full description
Overload, over-temperature and surge protection, ground fault monitoring and adaptive load management are built in. Housing 205 x 310 x 92 mm, 4.2 kg, IP65 and IK08 for indoor and outdoor use, for -30 to 50 °C; wall mounting or on an optional stand column. The stand-alone standard version without inverter link is the AC007E-01 L1. Warranty 5 years (Sungrow standard).
Specifications
- 4,2 kgWeight
General
- Category
- Accessories
- Product code
- 03-175
- Manufacturer code
- ACH00040
- Type
- 1-fase AC-lader
- Model
- AC007E-01
- Segment
- Residentieel
Power and efficiency
- Charge power
- 7,4 kW
Electrical
- Max. charge current
- 32 A
Mechanical
- Dimensions
- 205 x 310 x 92 mm
- Weight
- 4,2 kg
- IP rating
- IP65
Warranty
- Warranty
- 5 jaar (Sungrow standaard)
Other
- IP / IK
- IP65 / IK08
- Connector
- Type 2, 7 m
- Uitvoering
- Advanced versie (EMS via RS485 met Sungrow SH-RS hybride)
- Lekstroomdetectie
- 6 mA DC ingebouwd
Questions
The short ones are here. For anything else, ask below.
The Sungrow AC007E-01 is the advanced version of the Sungrow AC charger: single-phase 230 V with up to 7.4 kW (32 A), a fixed 7 m Type 2 charging cable and 6 mA DC residual current detection. It communicates over RS485 with the Sungrow SH3.0-6.0RS single-phase hybrid inverter, so it charges in iSolarCloud with Eco, Fast, Scheduled and Customised modes, including on PV surplus. Charging starts with the RFID card or the iSolarCloud app; OCPP 1.6J is supported.