Sungrow AC011E-01
- Type3-fase AC-lader
- Dimensions205 x 310 x 92 mm
- Weight3,8 kg
- IP ratingIP65
- Warranty5 jaar (Sungrow standaard)
Overview
The Sungrow AC011E-01 is the advanced version of the Sungrow AC charger: three-phase 400 V with up to 11 kW (16 A per phase), a fixed 7 m Type 2 charging cable and 6 mA DC residual current detection. It communicates over RS485 with the Sungrow SH5.0-10RT and SH5.0-10RT-20 three-phase hybrid inverters, so it charges in iSolarCloud with Eco, Fast, Scheduled and Customised modes, including on PV surplus. Charging starts with the RFID card or the iSolarCloud app; OCPP 1.6J is supported.
Read the full description
Overload, over-temperature and surge protection, ground fault monitoring and adaptive load management are built in. Housing 205 x 310 x 92 mm, 3.8 kg, IP65 and IK08 for indoor and outdoor use, for -30 to 50 °C; wall mounting or on an optional stand column. The stand-alone standard version without inverter link is the AC011E-01 L1. Warranty 5 years (Sungrow standard).
Specifications
- 3,8 kgWeight
General
- Category
- Accessories
- Product code
- 03-179
- Manufacturer code
- ACH00015
- Type
- 3-fase AC-lader
- Model
- AC011E-01
- Segment
- Residentieel
Power and efficiency
- Charge power
- 11 kW
Mechanical
- Dimensions
- 205 x 310 x 92 mm
- Weight
- 3,8 kg
- IP rating
- IP65
Warranty
- Warranty
- 5 jaar (Sungrow standaard)
Other
- Fase
- 3-fase 400 V / 16 A
- Stekker
- Type 2, 7 m
- Connector
- Type 2, 7 m
- Uitvoering
- Advanced versie (EMS via RS485 met Sungrow SH-RT hybride)
- Lekstroomdetectie
- 6 mA DC ingebouwd
Questions
The short ones are here. For anything else, ask below.
The Sungrow AC011E-01 is the advanced version of the Sungrow AC charger: three-phase 400 V with up to 11 kW (16 A per phase), a fixed 7 m Type 2 charging cable and 6 mA DC residual current detection. It communicates over RS485 with the Sungrow SH5.0-10RT and SH5.0-10RT-20 three-phase hybrid inverters, so it charges in iSolarCloud with Eco, Fast, Scheduled and Customised modes, including on PV surplus. Charging starts with the RFID card or the iSolarCloud app; OCPP 1.6J is supported.