Expansion Kit for 2nd Tower
Overview
This expansion set is intended for a second battery tower in a three-phase Kstar BlueSpark system. In the manual and quick installation guide of the E4KT to E12KT-D22 inverters, Kstar requires an additional set when 5 to 8 battery packs are used: an expansion base, a top cover for the upper battery, a communication cable, two power cables (black and orange), a PE cable and an unlocking tool for the battery connectors. The second tower stands 300 to 400 mm beside the first, and the base is levelled with the adjustable levelling nuts. The packs are then stacked on the base and the cables join BAT+, BAT− and COM of both towers. According to Kstar the system must not be operated without the base.
Specifications
General
- Category
- Accessories
- Product code
- 06-106
- Manufacturer code
- 2082G2377
- Type
- Uitbreidingsset tweede batterijtoren (dual-tower)
- Segment
- Residentieel
Questions
The short ones are here. For anything else, ask below.
This expansion set is intended for a second battery tower in a three-phase Kstar BlueSpark system. In the manual and quick installation guide of the E4KT to E12KT-D22 inverters, Kstar requires an additional set when 5 to 8 battery packs are used: an expansion base, a top cover for the upper battery, a communication cable, two power cables (black and orange), a PE cable and an unlocking tool for the battery connectors. The second tower stands 300 to 400 mm beside the first, and the base is levelled with the adjustable levelling nuts. The packs are then stacked on the base and the cables join BAT+, BAT− and COM of both towers. According to Kstar the system must not be operated without the base.
