Dyness Tower Pro BDU
- TypeBDU
- Weight28.5 kg
- IP ratingIP55
- Warranty10 jaar
Overview
The Dyness Tower Pro BDU is the control unit (Battery Disconnect Unit) of the Dyness Tower Pro TP7 to TP23. The BDU sits on top of the stacked Dyness HV9640 modules and contains the battery management, the DC main breaker with short-circuit protection, the wake button, the external positive and negative sockets, an RJ45 port for CAN/RS485 to the inverter, two parallel ports (Parallel 1# and 2#), a Wi-Fi status light and a Wi-Fi antenna. Size per the packing list 587 x 310 x 180 mm; the base of 587 x 310 x 186 mm is in the same packing list. BDU and base together weigh 28.5 kg.
Read the full description
Every tower needs exactly one BDU; the capacity is in the 2 to 6 HV9640 modules (7.68 to 23.04 kWh). With communication to the inverter the Tower Pro charges and discharges at up to 1C. The complete tower is IP55 and operates from -20 to 55 °C, charging below 0 °C only with the optional heating.
This BDU belongs only with the HV9640; the classic Tower and Tower S3 have their own BDU. Up to 12 Tower Pro clusters can run in parallel. Dyness grants 10 years warranty on the Tower Pro system under its European warranty terms.
Specifications
- 28.5 kgWeight
General
- Category
- Accessories
- Product code
- 09-130
- Manufacturer code
- Tower Pro BDU
- Type
- BDU
- Series
- Tower Pro
- Model
- Tower Pro BDU
- Segment
- Residentieel
Electrical
- Communication
- CAN/RS485
Mechanical
- Dimensions
- 587 × 180 × 310 mm (W × H × D; packing list 587*310*180; base 587*310*186 separate)
- Weight
- 28.5 kg
- IP rating
- IP55
Warranty
- Warranty
- 10 jaar
Other
- Hoort bij
- HV9640 / TP7-TP23
- Onderdeel
- BDU
How this product family works
Official Dyness video for the Dyness Tower Pro range. The footage covers this product family, not only this article.
Source: Dyness, official product family.
Questions
The short ones are here. For anything else, ask below.
The Dyness Tower Pro BDU is the control unit (Battery Disconnect Unit) of the Dyness Tower Pro TP7 to TP23. The BDU sits on top of the stacked Dyness HV9640 modules and contains the battery management, the DC main breaker with short-circuit protection, the wake button, the external positive and negative sockets, an RJ45 port for CAN/RS485 to the inverter, two parallel ports (Parallel 1# and 2#), a Wi-Fi status light and a Wi-Fi antenna. Size per the packing list 587 x 310 x 180 mm; the base of 587 x 310 x 186 mm is in the same packing list. BDU and base together weigh 28.5 kg.
