Overview
The Hyxi T-JB-Con (T-junction Bus Connector) is the T-junction Bus Connector of the Hyxi T-junction AC bus system for microinverters. It connects the AC output of a microinverter to the AC bus: the connector is fitted on the AC bus cable (strip the cable, insert L, N and PE into the correct holes, tighten the screws to 0.8 ± 0.1 Nm and then the nuts to 2.5 ± 0.5 Nm, refit the cover) and the AC plug of the microinverter clicks audibly into the connector. Hyxi warns not to damage the sealing ring and not to expose the connector directly to water.
Read the full description
The Hyxi T-junction system consists of the T-junction cable (TJ-Cable) with T-JB-Con bus connectors, the T-JB-EP end plug, the T-JB-PPC cover for unused branch ports and the T-JB-RET removal tool. Hyxi does not ship the T-junction parts with the microinverters; they are ordered separately. The system belongs with the Hyxi microinverters HYX-M300 to HYX-M2000 in Wi-Fi (SW) and Sub-1G (S) versions.
Specifications
General
- Category
- Accessories
- Product code
- 15-174
- Manufacturer code
- T-JB-Con
- Type
- T-junction systeemonderdeel
- Model
- T-JB-Con
- Segment
- Residentieel
Mechanical
- IP rating
- IP67
Other
- Past bij
- Hyxi HYX-M micro-omvormers
- Hyxi-naam
- T-junction Bus Connector
Questions
The short ones are here. For anything else, ask below.
The Hyxi T-JB-Con (T-junction Bus Connector) is the T-junction Bus Connector of the Hyxi T-junction AC bus system for microinverters. It connects the AC output of a microinverter to the AC bus: the connector is fitted on the AC bus cable (strip the cable, insert L, N and PE into the correct holes, tighten the screws to 0.8 ± 0.1 Nm and then the nuts to 2.5 ± 0.5 Nm, refit the cover) and the AC plug of the microinverter clicks audibly into the connector. Hyxi warns not to damage the sealing ring and not to expose the connector directly to water.