Hoymiles DTSU666 (CT-3 × 100 A)
- TypeDriefasige slimme meter (via CT)
- Phase3-fase (3P4W)
- Dimensions72 × 100 × 65 mm
- IP ratingIP51 (front)
- Warranty1 jaar
Overview
The Hoymiles DTSU666 (CT-3 × 100 A) is a Chint three-phase smart meter for a DIN35 rail (4 modules, 72 × 100 × 65 mm), supplied with three clip-on current transformers CT-100A/40mA with 6 m cable. It measures voltage, current, power and energy in both directions up to 100 A per phase in a 3P4W grid and communicates via RS485 (Modbus-RTU).
Read the full description
Hoymiles uses this meter for export management with the DTU-Pro or DTU-Pro-S: the DTU adjusts the output of the microinverters so that export stays below the set limit. With the three-phase hybrid and AC-coupled inverters HYT-HV-EUG1 and HAT-HV-EUG1 it is the grid-side smart meter: one meter per inverter, with the three CTs on L1, L2 and L3 and the arrow pointing to the grid.
Accuracy ±1.0 % between 0.05 In and In, ambient temperature -25 to 70 °C, supply voltage 154-253 V per phase, self-consumption up to 1.5 W. The front panel is IP51; install the meter in a meter cabinet or distribution board. Hoymiles gives a 1-year warranty on the DTSU666 series.
Specifications
General
- Category
- Accessories
- Product code
- 42-145
- Manufacturer code
- DTSU666 + 100A CT
- Type
- Driefasige slimme meter (via CT)
- Model
- DTSU666 (CT-3 × 100 A)
- Segment
- Residentieel
Electrical
- Phase
- 3-fase (3P4W)
- Communication
- RS485 (Modbus-RTU)
Mechanical
- Dimensions
- 72 × 100 × 65 mm
- IP rating
- IP51 (front)
Warranty
- Warranty
- 1 jaar
Other
- Accuracy
- ±1,0 % (0,05 In-In)
- Montage
- DIN35-rail, 4 modules
- Meetbereik
- 0-100 A per fase
- CT-afmetingen
- 30 × 45 × 32 mm
- Eigen verbruik
- ≤ 1,5 W
- Voedingsspanning
- 154-253 V (fase)
- Omgevingstemperatuur
- -25 tot 70 °C
- Stroomtransformatoren
- 3 × CT-100A/40mA, kabel 6 m
Questions
The short ones are here. For anything else, ask below.
The Hoymiles DTSU666 (CT-3 × 100 A) is a Chint three-phase smart meter for a DIN35 rail (4 modules, 72 × 100 × 65 mm), supplied with three clip-on current transformers CT-100A/40mA with 6 m cable. It measures voltage, current, power and energy in both directions up to 100 A per phase in a 3P4W grid and communicates via RS485 (Modbus-RTU).