Overview
The Hoymiles Flex-S3 Connection Cable S3-CC-EN25-300 (formerly HMS Connection Cable-EN25-300) is an AC connection cable for single-phase Hoymiles HMS microinverters: 3 × 2.5 mm² H07RN-F (450 V) with 3.0 m of cable between the two connectors, a current rating of 25 A at 55 °C and a minimum bending radius of 8 cm.
Read the full description
Connection cables, Flex-S3 Trunk Connectors and Extension Connectors build a custom AC trunk. A Flex-S3 Cable Terminal Connector turns an AC cable into the end cable to the distribution board, and a Flex-S3 Sealing Cap covers an unused trunk-connector port. The connectors are 2P+PE, 300 V and 40 A, IP68 and UL 94-V0; the cable carries a UV rating according to 2 PfG 1940.
On 2.5 mm² Hoymiles specifies a maximum of 11 to 19 HMS-1T, 5 to 9 HMS-2T or 2 to 3 HMS-4T units per branch (230 V, depending on the power rating); always follow local requirements. The Flex-S3 system does not fit the MIS series (Flex-S2) or the three-phase HMT series.
Specifications
General
- Category
- Cabling
- Product code
- 42-182
- Manufacturer code
- HMS Connection Cable-EN25-300
- Type
- HMS AC-aansluitkabel
- Model
- S3-CC-EN25-300 (voorheen HMS Connection Cable-EN25-300)
- Segment
- Residentieel
Electrical
- Connection
- Flex-S3-connector (IP68)
Mechanical
- Length
- 3,0 m
Other
- Ader
- 3 × 2,5 mm² H07RN-F
- Past bij
- Hoymiles HMS 1T/2T/4T
- Min. buigradius
- 8 cm
- Nominale stroom
- 25 A bij 55 °C
- Nominale spanning kabel
- 450 V
Questions
The short ones are here. For anything else, ask below.
The Hoymiles Flex-S3 Connection Cable S3-CC-EN25-300 (formerly HMS Connection Cable-EN25-300) is an AC connection cable for single-phase Hoymiles HMS microinverters: 3 × 2.5 mm² H07RN-F (450 V) with 3.0 m of cable between the two connectors, a current rating of 25 A at 55 °C and a minimum bending radius of 8 cm.