Overview
The Hoymiles Flex-S3 Connection Cable S3-CC-EN40-110 (formerly HMS Connection Cable-EN40-110) is an AC connection cable for single-phase Hoymiles HMS microinverters: 3 × 4 mm² H07RN-F (450 V) with 1.1 m of cable between the two connectors, a current rating of 34 A at 55 °C and a minimum bending radius of 9 cm.
Read the full description
Connection cables, Flex-S3 Trunk Connectors and Extension Connectors build a custom AC trunk. A Flex-S3 Cable Terminal Connector turns an AC cable into the end cable to the distribution board, and a Flex-S3 Sealing Cap covers an unused trunk-connector port. The connectors are 2P+PE, 300 V and 40 A, IP68 and UL 94-V0; the cable carries a UV rating according to 2 PfG 1940.
On 4 mm² Hoymiles specifies a maximum of 15 to 26 HMS-1T, 7 to 13 HMS-2T or 3 to 4 HMS-4T units per branch (230 V, depending on the power rating); always follow local requirements. The Flex-S3 system does not fit the MIS series (Flex-S2) or the three-phase HMT series.
Specifications
General
- Category
- Cabling
- Product code
- 42-184
- Manufacturer code
- HMS Connection Cable-EN40-110
- Type
- HMS AC-aansluitkabel
- Model
- S3-CC-EN40-110 (voorheen HMS Connection Cable-EN40-110)
- Segment
- Residentieel
Electrical
- Connection
- Flex-S3-connector (IP68)
Mechanical
- Length
- 1,1 m
Other
- Ader
- 3 × 4 mm² H07RN-F
- Past bij
- Hoymiles HMS 1T/2T/4T
- Min. buigradius
- 9 cm
- Nominale stroom
- 34 A bij 55 °C
- Nominale spanning kabel
- 450 V
Questions
The short ones are here. For anything else, ask below.
The Hoymiles Flex-S3 Connection Cable S3-CC-EN40-110 (formerly HMS Connection Cable-EN40-110) is an AC connection cable for single-phase Hoymiles HMS microinverters: 3 × 4 mm² H07RN-F (450 V) with 1.1 m of cable between the two connectors, a current rating of 34 A at 55 °C and a minimum bending radius of 9 cm.