Solinteg M2HT-10K-30-AC
- Power10 kW
- Phase3-fase
- IP ratingIP66
- CommunicationCAN, RS485, optioneel Wi-Fi/LAN
Overview
The Solinteg M2HT-10K-30-AC is a three-phase AC-coupled battery inverter of 10 kW from the Integ M series (M2HT-5~10K-30-AC) for adding storage to an existing PV installation. The inverter has no PV inputs: it works alongside an existing grid-tied inverter and charges the high-voltage battery with the PV surplus measured at the connection point by the supplied current transformers (3 x 120 A) or a separately ordered Solinteg RMM meter. Battery side: lithium with BMS, 130 to 750 V, 30 A charge and discharge, 10 kW.
Read the full description
On the grid the inverter delivers 10 kW and 10 kVA (rated 15.2 A per phase at 220/380 V, maximum 17.6 A), with 110 percent unbalanced output; up to 15 kVA (22.7 A) from the grid for charging and backup loads. The backup output supplies 10 kW and 16 kVA for 10 s and switches within 10 ms. Work modes for self-consumption, ToU and dynamic pricing and peak shaving, dry contacts for heat pump or EV charger and parallel operation of up to 10 units on-grid (2 off-grid).
505 x 460 x 207 mm (w x h x d), 24 kg, IP66, natural convection below 25 dB, standby below 15 W, -30 to 60 °C, LED and OLED, CAN and RS485; the communication module (Wi-Fi/LAN) is in the box. Solinteg asks to match the battery against its own compatibility list; the M2HT-AC is not on the Dyness lists of 28 May 2026. To connect PV directly, choose a hybrid MHT inverter.
Specifications
- 10 kWPower
- 24 kgWeight
General
- Category
- Inverters
- Product code
- 12-116
- Manufacturer code
- M2HT-10K-30-AC
- Series
- Integ M2 AC Coupled (M2HT 5-10K-30-AC)
- Model
- M2HT-10K-30-AC
- Inverter type
- AC-gekoppelde batterijomvormer
- Segment
- Residentieel
- Included
- communicatiemodule, 3 x 120 A CT
Power and efficiency
- Power
- 10 kW
- Nominal AC
- 10 kW
Electrical
- Phase
- 3-fase
- Communication
- CAN, RS485, optioneel Wi-Fi/LAN
- Battery
- Lithium 130-750 V, 30 A
Mechanical
- Dimensions
- 505 x 460 x 207 mm
- Weight
- 24 kg
- IP rating
- IP66
Warranty
- Warranty
- 10 jaar
Other
- Backup
- 10 kW continu
- Geluid
- <25 dB
- Koeling
- natuurlijke convectie
- Parallel
- tot 10 units (on-grid)
- Stand-by
- <15 W
- Backup piek
- 16 kVA @10s
- Omschakeltijd
- <10 ms
- Max. AC-stroom
- 17,6 A
- Max. netinvoer
- 15 kVA, 22,7 A
- Max. schijnbaar AC
- 10 kVA
- Nominale AC-stroom
- 15,2 A per fase (400 V)
- Bedrijfstemperatuur
- -30 tot +60 °C
- Laad-/ontlaadvermogen
- 10 kW
Questions
The short ones are here. For anything else, ask below.
The Solinteg M2HT-10K-30-AC is a three-phase AC-coupled battery inverter of 10 kW from the Integ M series (M2HT-5~10K-30-AC) for adding storage to an existing PV installation. The inverter has no PV inputs: it works alongside an existing grid-tied inverter and charges the high-voltage battery with the PV surplus measured at the connection point by the supplied current transformers (3 x 120 A) or a separately ordered Solinteg RMM meter. Battery side: lithium with BMS, 130 to 750 V, 30 A charge and discharge, 10 kW.
Solinteg M2HT-10K-30-AC is rated 10 kW.