Landscape koppelsteun (L=1500mm)
- TypeKoppelsteun landscape
- Warranty20 jaar fabrieksgarantie
Overview
The Cobalt landscape connector base L=1500 mm (art. 1011500) is the follow-on support of the Cobalt flat-roof system in landscape layout. It is supplied pre-assembled and couples tool-free to the previous support with a twist-and-click connection; alternatively, a starting base with a landscape connector L=500 mm can be used. The connector base fixes the row spacing: Cobalt specifies landscape centre distances of 1500 and 1700 mm, and this version belongs to 1500 mm (other version: L=1700 mm). Modules are set at 10 degrees and frames of 30 to 45 mm are clamped at a minimum of 4.5 Nm. Because the system is coupled, ballast is not needed under every module; ballast plan, wind zone and edge zones are determined with CoBuilder. Cable trays can be screwed behind the upright. The system is wind-tunnel tested, intended for roofs of 0 to 6 degrees and calculated to the Eurocodes and NEN 7250. Warranty: 20 years under the Cobalt warranty conditions.
Specifications
General
- Category
- Mounting material
- Product code
- 18-133
- Manufacturer code
- 1011500
- Type
- Koppelsteun landscape
- Segment
- Residentieel
Mechanical
- Length
- 1500 mm
Warranty
- Warranty
- 20 jaar fabrieksgarantie
Other
- Hoek
- 10 graden
- Merk
- Cobalt Mounting Systems
- Hart-op-hart
- 1500 mm
From carton to a working system
Official Cobalt installation video for the Cobalt platdak range. The footage covers this product family, not only this article.
Source: Cobalt, official product family.
Questions
The short ones are here. For anything else, ask below.
The Cobalt landscape connector base L=1500 mm (art. 1011500) is the follow-on support of the Cobalt flat-roof system in landscape layout. It is supplied pre-assembled and couples tool-free to the previous support with a twist-and-click connection; alternatively, a starting base with a landscape connector L=500 mm can be used. The connector base fixes the row spacing: Cobalt specifies landscape centre distances of 1500 and 1700 mm, and this version belongs to 1500 mm (other version: L=1700 mm). Modules are set at 10 degrees and frames of 30 to 45 mm are clamped at a minimum of 4.5 Nm. Because the system is coupled, ballast is not needed under every module; ballast plan, wind zone and edge zones are determined with CoBuilder. Cable trays can be screwed behind the upright. The system is wind-tunnel tested, intended for roofs of 0 to 6 degrees and calculated to the Eurocodes and NEN 7250. Warranty: 20 years under the Cobalt warranty conditions.