Cobalt oost-west landscape koppelsteun 2450 mm
- TypeKoppelsteun oost-west landscape
- DimensionsL = 2450 mm
- Warranty20 jaar fabrieksgarantie
Overview
The Cobalt east-west support L=2450 mm (art. 1212450) is the base support of the Cobalt flat-roof system in east-west layout: the central upright carries the high side of two opposing modules. According to Cobalt, a complete east-west installation is built from just four basic parts and the aerodynamic design needs a minimum of ballast. The supports are supplied pre-assembled and couple tool-free with a twist-and-click connection. The standard centre distance is 2450 mm, for modules up to 1140 mm wide; a shorter version (art. 1212380) is available for narrower modules. Modules with frames of 30 to 45 mm are clamped at a minimum of 4.5 Nm, and the array edges are closed with the landscape/east-west side plate. Ballast carriers and ballast plan follow from CoBuilder; because the system is coupled, ballast is not needed under every module. Material according to Cobalt: Magnelis steel and recycled UV-stable PP. Warranty: 20 years under the Cobalt warranty conditions.
Specifications
General
- Category
- Mounting material
- Product code
- 18-149
- Manufacturer code
- 1212450
- Type
- Koppelsteun oost-west landscape
- Segment
- Residentieel
Mechanical
- Dimensions
- L = 2450 mm
- Length
- 2450 mm
Warranty
- Warranty
- 20 jaar fabrieksgarantie
Other
- Merk
- Cobalt Mounting Systems
- Materiaal
- Magnelis-staal, PP
- Paneelbreedte
- tot 1140 mm
From carton to a working system
Official Cobalt installation video for the Cobalt platdak range. The footage covers this product family, not only this article.
Source: Cobalt, official product family.
Questions
The short ones are here. For anything else, ask below.
The Cobalt east-west support L=2450 mm (art. 1212450) is the base support of the Cobalt flat-roof system in east-west layout: the central upright carries the high side of two opposing modules. According to Cobalt, a complete east-west installation is built from just four basic parts and the aerodynamic design needs a minimum of ballast. The supports are supplied pre-assembled and couple tool-free with a twist-and-click connection. The standard centre distance is 2450 mm, for modules up to 1140 mm wide; a shorter version (art. 1212380) is available for narrower modules. Modules with frames of 30 to 45 mm are clamped at a minimum of 4.5 Nm, and the array edges are closed with the landscape/east-west side plate. Ballast carriers and ballast plan follow from CoBuilder; because the system is coupled, ballast is not needed under every module. Material according to Cobalt: Magnelis steel and recycled UV-stable PP. Warranty: 20 years under the Cobalt warranty conditions.