Sungrow SG125CX-P2
- Power125 kW
- Phase3-fase
- MPPT channels12 (2 strings per MPPT)
- Efficiency98,5%
- IP ratingIP66
- CommunicationRS485 / WLAN (optie) / Ethernet (optie)
Overview
The Sungrow SG125CX-P2 is a three-phase string inverter of 125 kW (125 kVA, 181.1 A) for large commercial roofs and ground-mounted systems. Twelve MPPTs with two strings each, MPPT range 180 to 1000 V, max. PV input voltage 1100 V and a recommended PV power of 175 kW; max. efficiency 98.5 %. This V113 version has DC connectors rated up to 20 A; according to Sungrow the 30 A connectors only apply to V21 or serial numbers from A23C0202325.
Read the full description
Dynamic shading optimisation mode, PID recovery, string current monitoring, smart IV curve diagnosis and AFCI 2.0 are built in, with DC surge protection Type I+II and AC Type II, IP66 and C5 corrosion protection. Aluminium AC cables up to 240 mm² fit the OT/DT terminals. Communication via RS485, optional WLAN and Ethernet; commissioning via Bluetooth and app, monitoring in iSolarCloud.
Enclosure 1020 x 795 x 360 mm, max. 95 kg, smart forced air cooling and wall mounting with bracket. Warranty according to the Sungrow warranty terms for C&I inverters above 20 kW.
Specifications
- 125 kWPower
- 98,5%Efficiency
- 1100 VMax. DC voltage
- 12 (2 strings per MPPT)MPPT channels
General
- Category
- Inverters
- Product code
- 03-103
- Manufacturer code
- ASG01901
- Type
- 3-fase stringomvormer
- Model
- SG125CX-P2
- Segment
- Commercieel
Power and efficiency
- Power
- 125 kW
- Efficiency
- 98,5%
- Nominal AC
- 125 kW
Electrical
- Phase
- 3-fase
- MPPT channels
- 12 (2 strings per MPPT)
- Max. DC voltage
- 1100 V
- MPPT range
- 180-1000 V
- Communication
- RS485 / WLAN (optie) / Ethernet (optie)
Mechanical
- Dimensions
- 1020 x 795 x 360 mm
- Weight
- 95 (max.) kg
- IP rating
- IP66
Questions
The short ones are here. For anything else, ask below.
The Sungrow SG125CX-P2 is a three-phase string inverter of 125 kW (125 kVA, 181.1 A) for large commercial roofs and ground-mounted systems. Twelve MPPTs with two strings each, MPPT range 180 to 1000 V, max. PV input voltage 1100 V and a recommended PV power of 175 kW; max. efficiency 98.5 %. This V113 version has DC connectors rated up to 20 A; according to Sungrow the 30 A connectors only apply to V21 or serial numbers from A23C0202325.
Sungrow SG125CX-P2 is rated 125 kW.
Module efficiency is 98,5%.
